Adafruit_SSD1331.h File Reference

#include <Adafruit_SPITFT.h>

Go to the source code of this file.

Classes
class	Adafruit_SSD1331
	Class to manage hardware interface with SSD1331 chipset. More...

Macros
#define	SSD1331_COLORORDER_RGB
	Select one of these defines to set the pixel color order.
#define	SSD1331_DELAYS_HWFILL   (3)
	Fill delay.
#define	SSD1331_DELAYS_HWLINE   (1)
	Line delay.
#define	SSD1331_CMD_DRAWLINE   0x21
	Draw line.
#define	SSD1331_CMD_DRAWRECT   0x22
	Draw rectangle.
#define	SSD1331_CMD_FILL   0x26
	Fill enable/disable.
#define	SSD1331_CMD_SETCOLUMN   0x15
	Set column address.
#define	SSD1331_CMD_SETROW   0x75
	Set row adress.
#define	SSD1331_CMD_CONTRASTA   0x81
	Set contrast for color A.
#define	SSD1331_CMD_CONTRASTB   0x82
	Set contrast for color B.
#define	SSD1331_CMD_CONTRASTC   0x83
	Set contrast for color C.
#define	SSD1331_CMD_MASTERCURRENT   0x87
	Master current control.
#define	SSD1331_CMD_SETREMAP   0xA0
	Set re-map & data format.
#define	SSD1331_CMD_STARTLINE   0xA1
	Set display start line.
#define	SSD1331_CMD_DISPLAYOFFSET   0xA2
	Set display offset.
#define	SSD1331_CMD_NORMALDISPLAY   0xA4
	Set display to normal mode.
#define	SSD1331_CMD_DISPLAYALLON   0xA5
	Set entire display ON.
#define	SSD1331_CMD_DISPLAYALLOFF   0xA6
	Set entire display OFF.
#define	SSD1331_CMD_INVERTDISPLAY   0xA7
	Invert display.
#define	SSD1331_CMD_SETMULTIPLEX   0xA8
	Set multiplex ratio.
#define	SSD1331_CMD_SETMASTER   0xAD
	Set master configuration.
#define	SSD1331_CMD_DISPLAYOFF   0xAE
	Display OFF (sleep mode)
#define	SSD1331_CMD_DISPLAYON   0xAF
	Normal Brightness Display ON.
#define	SSD1331_CMD_POWERMODE   0xB0
	Power save mode.
#define	SSD1331_CMD_PRECHARGE   0xB1
	Phase 1 and 2 period adjustment.
#define	SSD1331_CMD_CLOCKDIV   0xB3
	Set display clock divide ratio/oscillator frequency.
#define	SSD1331_CMD_PRECHARGEA   0x8A
	Set second pre-charge speed for color A.
#define	SSD1331_CMD_PRECHARGEB   0x8B
	Set second pre-charge speed for color B.
#define	SSD1331_CMD_PRECHARGEC   0x8C
	Set second pre-charge speed for color C.
#define	SSD1331_CMD_PRECHARGELEVEL   0xBB
	Set pre-charge voltage.
#define	SSD1331_CMD_VCOMH   0xBE
	Set Vcomh voltge.