Adafruit_SSD1351.h File Reference

#include <Adafruit_SPITFT.h>

Go to the source code of this file.

Classes
class	Adafruit_SSD1351
	Class that stores state and functions for interacting with SSD1351 OLED displays. More...

Macros
#define	SSD1351WIDTH   128
	DEPRECATED screen width.
#define	SSD1351HEIGHT   128
	DEPRECATED screen height, set to 96 for 1.27".
#define	SSD1351_CMD_SETCOLUMN   0x15
	See datasheet.
#define	SSD1351_CMD_SETROW   0x75
	See datasheet.
#define	SSD1351_CMD_WRITERAM   0x5C
	See datasheet.
#define	SSD1351_CMD_READRAM   0x5D
	Not currently used.
#define	SSD1351_CMD_SETREMAP   0xA0
	See datasheet.
#define	SSD1351_CMD_STARTLINE   0xA1
	See datasheet.
#define	SSD1351_CMD_DISPLAYOFFSET   0xA2
	See datasheet.
#define	SSD1351_CMD_DISPLAYALLOFF   0xA4
	Not currently used.
#define	SSD1351_CMD_DISPLAYALLON   0xA5
	Not currently used.
#define	SSD1351_CMD_NORMALDISPLAY   0xA6
	See datasheet.
#define	SSD1351_CMD_INVERTDISPLAY   0xA7
	See datasheet.
#define	SSD1351_CMD_FUNCTIONSELECT   0xAB
	See datasheet.
#define	SSD1351_CMD_DISPLAYOFF   0xAE
	See datasheet.
#define	SSD1351_CMD_DISPLAYON   0xAF
	See datasheet.
#define	SSD1351_CMD_PRECHARGE   0xB1
	See datasheet.
#define	SSD1351_CMD_DISPLAYENHANCE   0xB2
	Not currently used.
#define	SSD1351_CMD_CLOCKDIV   0xB3
	See datasheet.
#define	SSD1351_CMD_SETVSL   0xB4
	See datasheet.
#define	SSD1351_CMD_SETGPIO   0xB5
	See datasheet.
#define	SSD1351_CMD_PRECHARGE2   0xB6
	See datasheet.
#define	SSD1351_CMD_SETGRAY   0xB8
	Not currently used.
#define	SSD1351_CMD_USELUT   0xB9
	Not currently used.
#define	SSD1351_CMD_PRECHARGELEVEL   0xBB
	Not currently used.
#define	SSD1351_CMD_VCOMH   0xBE
	See datasheet.
#define	SSD1351_CMD_CONTRASTABC   0xC1
	See datasheet.
#define	SSD1351_CMD_CONTRASTMASTER   0xC7
	See datasheet.
#define	SSD1351_CMD_MUXRATIO   0xCA
	See datasheet.
#define	SSD1351_CMD_COMMANDLOCK   0xFD
	See datasheet.
#define	SSD1351_CMD_HORIZSCROLL   0x96
	Not currently used.
#define	SSD1351_CMD_STOPSCROLL   0x9E
	Not currently used.
#define	SSD1351_CMD_STARTSCROLL   0x9F
	Not currently used.

Detailed Description

This is the documentation for Adafruit's SSD1351 driver for the Arduino platform.

This library works with the Adafruit 1.5" color OLED: http://www.adafruit.com/products/1431 and 1.27" color OLED: http://www.adafruit.com/products/1673

These displays use SPI to communicate. SPI requires 4 pins (MOSI, SCK, select, data/command) and optionally a reset pin. Hardware SPI or 'bitbang' software SPI are both supported.

Adafruit invests time and resources providing this open source code, please support Adafruit and open-source hardware by purchasing products from Adafruit!

This library depends on Adafruit_GFX being present on your system. Please make sure you have installed the latest version before using this library.

Written by Limor Fried/Ladyada for Adafruit Industries, with contributions from the open source community.

BSD license, all text above must be included in any redistribution.